A DMC, Lda., certifying training vibration effects. Iberian is representative of the Vibration Institute and a reference in the Portuguese market for Predictive Maintenance by providing inspection services.

training offer

Almada or Online - 13 a 16 December 2021- (Certification Exam on the morning of 17)

International certification by the Vibration Institute according to ISO 18436-2

Introduction:

The certification program of the Vibration Institute for vibration analysis was developed and is managed by a committee representing various industries and is applied worldwide. The program follows the recommendations of the International Organization for Standardization(ISO) through ISO 18436.2, Condition Monitoring and Diagnostics of Machines – Requirements for Training and Certification of Personnel – Part 2: Vibration Condition Monitoring and Diagnostics.

Here you will find a leaflet with complete information and dissemination of this action

Here you can download the registration form

International Certification

at the end of the course, as an option, the certification exam consisting of questions formulated by the Vibration Institute may be taken. Exams are shipped from the United States of America, reason why registrations should be made., no minimum, one month in advance.

Former:  Eng. Victor Duarte

experience 26 years in the field of Measurement and Analysis of Vibrations. Trainer in several courses in the field of vibration analysis at national and international level. Level II certification by the Vibration Institute.

Data e local : 5 e 6 of May 2021, 09:00 at 12:30, On-line

Introduction:

The limits defined in the different parts of the ISO standard 10816, are still widely used as criteria for the evaluation of absolute vibration measurement results, although, partly, are already obsolete. She and the ISO series 7919, relative vibrations, are being replaced by the series of ISO standards 20816. This renewal of standards, has important implications for how machine vibration levels should be assessed.

Given the importance of this fact, DMC will carry out an update training action, for the presentation of the new ISO standards, from the series 20816, for assessing vibration levels in machines, for predictive maintenance professionals and vibration analysts in general.

 

Program content

ISO series review 10816 e 7919

Scope of application

What has changed and will change

The standards that are still in force

 

The new ISO series 20186

Scope of the various parts that already exist

The parts that are still under review

Main differences

Review of the parts still in force of the ISO series 10816

Part 3: Industrial machines with rated power above 15 kW and nominal speeds between 120 r / min e 15.000 r / min when measured in situ

Part 6: Alternative machines with power above 100 kW

Part 7: Rotodynamic pumps (centrifuges) for industrial applications

Part 21: Horizontal shaft wind turbines with gears

Presentation of the different parts of the ISO 20816

Part 1: General guidelines

Part 2: Onshore gas turbines, steam turbines and superior generators

Part 3: Coupled industrial machines (in project)

Part 4: Gas turbines with more than 3 MW

Part 5: Hydraulic power plant machines

Part 8: Reciprocating compressors

Part 9: gears

Part 10: Turbochargers (in project)

Fans - to ISO 14694

trainers:  Eng. Victor Duarte, Eng. Carlos Aroeira

Duration:  6 hours

Cost

150€ + VAT

Payment upon registration

To download the course brochure click here.

To download the registration form click here.

Almada – 22 a 25 November 2022- (Certification Exam on the morning of the 26th<)

International certification by the Vibration Institute according to ISO 18436-2

Introduction:

The certification program of the Vibration Institute for vibration analysis was developed and is managed by a committee representing various industries and is applied worldwide. The program follows the recommendations of the International Organization for Standardization(ISO) through ISO 18436.2, Condition Monitoring and Diagnostics of Machines – Requirements for Training and Certification the Staff - Part 2: Vibration Condition Monitoring and Diagnostics.

 Program content

Vibration Theory

Nature physical vibration

vibratory motion

Measurement of vibration

phase angle measurement

Vibration Analysis

natural frequencies and critical speed

Data acquisition

Selecting the measurement parameter

transducers

Selection of transducers, mounting location and

measuring equipment

signal processing

Troubleshooting

Diagnostic techniques faults: Damage to 1xrpm

bearings, gears, electric motors, etc.

Condition Assessment

Vibration relative and absolute vibration

Condition Monitoring

System setup: Measuring points, routines, etc

Selection of the measuring equipment

Inspection Frequency, alarms

Balancing of Rotating Machinery

Types of imbalance. preliminary checks

mass selection assay

vector method

Acceptable vibration levels

Former:  Eng. Victor Duarte

experience 26 years in the field of Measurement and Analysis of Vibrations. Trainer in several courses in the field of vibration analysis at national and international level. Level II certification by the Vibration Institute.

The costs of action Are included:

Course Manual, certificate of participation, lunch and coffee. The certification exam costs are included the annual membership share of the Vibration Institute which entitles: Vibrations magazine reception during 1 year, discount 10% the inscription of the National Technical Training Symposium, An Annual Proceedings at a reduced cost.

Almada – 14 a 16 December 2020

This course is designed keeping in mind the difficult challenges that the technicians who perform diagnosis, in machines, a vibration analysis, They face daily. The participants, to make the most of this course, They should already have several years of experience in the field.

 Program content

Introduction to the operation of frequency analyzers. Vibration analysis techniques

Vibration Isolation

General Approach to Diagnosis

Resonance Diagnostic. The operating deflection shape.

Unbalance diagnosis

Diagnostic Misalignment. Bases empenadas

Clearances and Shocks diagnosis

Troubleshooting for Bearings. The envelope Analysis

Gears diagnostic

Introduction to using proximity transducers

Troubleshooting in journal bearings

Vibrations of hydraulic and aerodynamic origin

Integration analysis of oils vibrometry

Diagnosis of Electric Motors

trainers: 

Eng. Victor Duarte: experience 26 years in the field of Measurement and Analysis of Vibrations. Trainer in several courses in the field of vibration analysis at national and international level. Level II certification by the Vibration Institute.

Eng. Carlos Aroeira: more of 30 years of experience in the field of Vibration. Leccionador many courses in the area

The costs of action Are included:

Course Manual, certificate of participation, lunch and coffee.

Almada – 17 December 2020

This course is designed keeping in mind the difficult challenges that the technicians who perform diagnosis on electrical mores, They face daily. The participants, to make the most of this course, They should already have several years of experience in the field.

 Program content

Condition control of electric motors - a perspective

Operation principle

Failure Modes

Frequency of vibration

Types of electrical anomalies and their vibrations

Types of mechanical vibrations and their anomalies

Pata thigh

The Power Analysis

The tension on the shaft

Temperature Measurement

Vibrations in DC motors

Analysis engines technique by comparing the mathematical model

The ISO 20958 - Condition control and diagnosis of machine systems - Analysis of the electrical signature of three-phase electric induction motors

trainers: 

Eng. Victor Duarte: experience 26 years in the field of Measurement and Analysis of Vibrations. Trainer in several courses in the field of vibration analysis at national and international level. Level II certification by the Vibration Institute.

Eng. Carlos Aroeira: more of 30 years of experience in the field of Vibration.

The costs of action Are included:

Course Manual, certificate of participation, lunch and coffee.

Leccionador many courses in the area.