Training vibrations certifier

A DMC, Lda., certifying training vibration effects. Iberian is representative of the Vibration Institute and a reference in the Portuguese market for Predictive Maintenance by providing inspection services.

training offer

Almada – 12 a 15 October 2020- (Certification Exam on the morning of 16)

International certification by the Vibration Institute according to ISO 18436-2

Almada – 16 a 19 November 2020- (Certification Exam on the morning of 20)

International certification by the Vibration Institute according to ISO 18436-2

Introduction:

The certification program of the Vibration Institute for vibration analysis was developed and is managed by a committee representing various industries and is applied worldwide. The program follows the recommendations of the International Organization for Standardization (ISO) by ISO 18436.2, Condition Monitoring and Diagnostics of Machines – Requirements for Training and Certification the Staff - Part 2: Vibration Condition Monitoring and Diagnostics.

Program content

Vibration Theory

Nature physical vibration

vibratory motion

Measurement of vibration

phase angle measurement

Vibration Analysis

natural frequencies and critical speed

Data acquisition

Selecting the measurement parameter

transducers

Selection of transducers, mounting location and

measuring equipment

signal processing

Troubleshooting

Diagnostic techniques faults: Damage to 1xrpm

bearings, gears, electric motors, etc.

Condition Assessment

Vibration relative and absolute vibration

Condition Monitoring

System setup: Measuring points, routines, etc

Selection of the measuring equipment

Inspection Frequency, alarms

Balancing of Rotating Machinery

Types of imbalance. preliminary checks

mass selection assay

vector method

Acceptable vibration levels

Former: Eng. Victor Duarte

experience 26 years in the field of Measurement and Analysis of Vibrations. Trainer in several courses in the field of vibration analysis at national and international level. Level II certification by the Vibration Institute.

The costs of action Are included:

Course Manual, certificate of participation, lunch and coffee. The certification exam costs are included the annual membership share of the Vibration Institute which entitles: Vibrations magazine reception during 1 year, discount 10% the inscription of the National Technical Training Symposium, An Annual Proceedings at a reduced cost.

Almada – 14 a 16 December 2020

This course is designed keeping in mind the difficult challenges that the technicians who perform diagnosis, in machines, a vibration analysis, They face daily. The participants, to make the most of this course, They should already have several years of experience in the field.

Program content

Introduction to the operation of frequency analyzers. Vibration analysis techniques

Vibration Isolation

General Approach to Diagnosis

Resonance Diagnostic. The operating deflection shape.

Unbalance diagnosis

Diagnostic Misalignment. Bases empenadas

Clearances and Shocks diagnosis

Troubleshooting for Bearings. The envelope Analysis

Gears diagnostic

Introduction to using proximity transducers

Troubleshooting in journal bearings

Vibrations of hydraulic and aerodynamic origin

Integration analysis of oils vibrometry

Diagnosis of Electric Motors

trainers:

Eng. Victor Duarte: experience 26 years in the field of Measurement and Analysis of Vibrations. Trainer in several courses in the field of vibration analysis at national and international level. Level II certification by the Vibration Institute.

Eng. Carlos Aroeira: more of 30 years of experience in the field of Vibration. Leccionador many courses in the area

The costs of action Are included:

Course Manual, certificate of participation, lunch and coffee.

Almada – 17 December 2020

This course is designed keeping in mind the difficult challenges that the technicians who perform diagnosis on electrical mores, They face daily. The participants, to make the most of this course, They should already have several years of experience in the field.

Program content

electric motors Condition monitoring – one perspective

Operation principle

Failure Modes

Frequency of vibration

Types of electrical anomalies and their vibrations

Types of mechanical vibrations and their anomalies

Pata thigh

The Power Analysis

The tension on the shaft

Temperature Measurement

Vibrations in DC motors

Analysis engines technique by comparing the mathematical model

The ISO 20958 – condition monitoring and diagnostic equipment systems – Analysis of the electrical signature of electric motors of induction

trainers:

Eng. Victor Duarte: experience 26 years in the field of Measurement and Analysis of Vibrations. Trainer in several courses in the field of vibration analysis at national and international level. Level II certification by the Vibration Institute.

Eng. Carlos Aroeira: more of 30 years of experience in the field of Vibration.

The costs of action Are included:

Course Manual, certificate of participation, lunch and coffee.

Leccionador many courses in the area.

Registration and dates for Realization of courses

Why resort to the certifying training services in the DMC vibrations?

EXPERIENCE

We offer you a team of professionals with decades of experience

TECHNOLOGY

We offer you the technology and latest knowledge

COVERAGE

The DMC provides global services and monitoring equipment solutions

QUALITY

Satisfaction guaranteed proven by their customers. In DMC cultivates a passion for customer satisfaction.

A DMC, with their certifying training services vibrations, It provides the ability to improve the functioning of the machines, on their premises, putting at your fingertips:

  • Increased availability of resulting in higher production equipment from the capital invested
  • Reduction of maintenance costs
  • Greater efficiency in the conduct of facilities, allowing adjust the volume of production to the conditions of facilities
  • Achieve a stable level of quality
  • Greater capacity for dialogue with manufacturers of machinery and equipment or repairing, based on knowledge obtained from the control condition
  • Better relationships with customers due to the reduction of unplanned production stoppages
  • Possibility of improving the specification and design of future installations
  • Increased machines of operators safety

We create lasting relationships of trust

GET SOLUTIONS AND BUDGET